22W Stereo Amplifier

Electronic Schematics > Audio > 22W Stereo Amplifier

---

Very simple and useful circuit for amplify the stereo signals .The circuit dissipates roughly 28 watts of heat, so a good heatsink is necessary. The chip should run cool enough to touch with the proper heatsink installed .the circuit operates at 12 Volts at about 5 Amps at full volume. Lower volumes use less current, and therefore produce less heat. R1 is also a 5% resistor.

Stereo Amplifier circuit

Title: 22W Stereo Amplifier
electronic circuit
Source: unknown
Published on: 2005-08-27
Reads: 1857
Print version:

Other electronic circuits and schematics from Audio

---

• 50 Watt Amplifier

• 100W Audio Amplifier

• Minimalist Discrete Hi-Fi Preamp

• Simple Intercom

• Automatic Loudness Control

• Low cost intercom using transistors

• 1.5W Audio power amplifier (12V)

• Baxendall Tone Control

• 250 mW Audio Amplifier

• Improved 3 Transistor Audio Amp (80 milliwatt)