Stepper Motor Controller

I found this circuit in my files. I don't know where it came from, but it looks like I photocopied it from somewhere years ago. I have been told that it came from "The Robot Builder's Bonanza", by Gordan McComb. Anyway, I thought that it should be fairly useful, so I decided to post it here. The circuit is very simple and inexpensive. This is good thing because most commercial stepper motor controller ICs are quite expensive. This circuit is built from standard components and can easily be adapted to be controlled by a computer. If you use cheap surplus transistors and stepper motor, the price of the circuit can be kept to under $10.

Schematic


This is the schematic of the Stepper Motor Controller

Parts

Part Total Qty. Description Substitutions
R1, R2 ,R3, R4 4 1K 1/4W Resistor  
D1, D2, D3, D4 4 1N4002 Silicon Diode  
Q1, Q2, Q3, Q4 4 TIP31 NPN Transistor (See Notes) TIP41, 2N3055
U1 1 4070 CMOS XOR Integrated Circuit  
U2 1 4027 CMOS Flip-Flop  
S1 1 SPDT Switch  
MISC 1 Case, Board, Wire, Stepper Motor  

Notes

1. You should be able to substitute any standard (2N3055, etc.) power transistor for Q1-Q4.

2. Every time the STEP line is pulsed, the motor moves one step.

3. S1 changes the motors direction.

Title: Stepper Motor Controller
electronic circuit
Source: www.aaroncake.net
Published on: 2005-02-03
Reads: 1616
Print version: Print version

Other electronic circuits and schematics from Motor, light and power control


Electronic circuits > Motor, light and power control > Stepper Motor Controller