Audio level meter (vumeter)
This circuit uses just one IC and a very few number of external components. It displays the audio level in terms of 10 LEDs. The input voltage can vary from 12V to 20V, but suggested voltage is 12V.
The LM3915 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDs providing a logarithmic 3 dB/step analog display. LED current drive is regulated and programmable, eliminating the need for current limiting resistors.
The IC contains an adjustable voltage reference and an accurate ten-step voltage divider. The high-impedance input buffer accepts signals down to ground and up to within 1.5V of the positive supply. Further, it needs no protection against inputs of ±35V. The input buffer drives 10 individual comparators referenced to the precision divider. Accuracy is typically better than 1 dB.
Title: Audio level meter (vumeter)
electronic circuit
Source: www.electronic-circuits-diagrams.com
Published on: 2005-02-01
Reads: 969
Print version:
Other electronic circuits and schematics from Test and measurement
-
XTal Tester
-
Crystal Tester
-
1GHz Simple Frequency Counter
-
Contactless Mains Voltage Indicator
-
Car Water Temperature
-
Oscilloscope testing module (huntron circuit)
-
Mosfet TESTER
-
Latching Continuity Tester
-
A simple Remote control Tester
-
Thermostat for 1KW Space Heater (SCR controlled)