The Video / Audio Distribution Amplifier
With the amount of equipment in home entertainment centers today the need to be able to vary the gain of the audio or video signal is needed. I found this particular circuit helpful when used in conjunction with the Universal Descrambler and a Stabilizer circuit I built for making copies of video tapes. It not only allowed me the ability to fine tune the video strength it also helped me increase the recorded audio which typically becomes poor when making tape copies.
Circuit operation is straight forward for amplifier circuits. The second channel for the audio amplifier is made up of the same components except the other half of IC1 is used. Pin 6 & 5 are inputs and 7 is the output.
Video Distribution Amplifier
Audio Distribution Amplifier
Title: The Video / Audio Distribution Amplifier
electronic circuit
Source: http://home.maine.rr.com
Published on: 2006-04-12
Reads: 3082
Print version: 
Other electronic circuits and schematics from Video and TV
-
Video Clock and Message Generator
-
Video Line Selector
-
UHF Preamplifier
-
S-video to composite video adapter
-
Driver for Multiple VGMonitors
-
Video Signal Amplifier
-
Isolation between antenna network and TV/radio equipment
-
Video Switch
-
4 Stage 555 Timer for Video Cam Control
-
Audio / video switch